bobbytooslow
Senior Member
Last Activity: Today, 06:47 PM
Joined: 12 July 2017
Location: Flagstaff, USA
-
Yes, an open back would be huge. It would likely mean no release on that end, but some folks are willing to make that tradeoff. And yes, it would likely...You may only view thumbnails in this gallery. This gallery has 3 photos. -
This is a great thread. Thanks folks.
The only thing I can add is this: Rescue/emergency is only part of the equation. Hopefully you are...Leave a comment:
-
That stoner kid setting up people's bindings in the shop TOTALLY dials it in dead on spec, I'm sure....Leave a comment:
-
It's a bummer that the work "funky" has come to mean "bad." I wish everyone used it with as much glee and optimism as Rasta Stevi...Leave a comment:
-
Our resort, Arizona Snowbowl, opened today with one chairlift and one singular White Ribbon of Death. Due to the mismatched ability-to-enthusiasm ratio...Leave a comment:
-
I guess heating, cutting, then removing the rubber seemed like the easiest way to go about getting a flat spot. And it helped me drop 2.37 grams, ha (and...Leave a comment:
-
Strong work! That should ski real nicely. Share some videos once you get them on the hill!Leave a comment:
-
I wouldn't risk it. As I'm sure you found, that plastic is pretty darn soft. Just the little burrs on the T-nut after you flatten/remove the prongs should...Leave a comment:
-
Right on, glad to see more folks wanting to rip the up and the down!
You are correct, the idea is to use 10-24, 10-32, or M5 screws &...Leave a comment:
-
I guess that's what I was getting at. The whole thing seems utterly unenforceable. Especially when there's money to be made....Leave a comment:
-
I have European friends who opened the season skiing in Italy. Then when the Italians shut skiing down, they skied in Austria. When the Austrians shut...Leave a comment:
-
Sure, what's a good email address to send it to? -
Could you send me your 3D file for your Michael Bolt-On Duck Butt. I screwed up the hole placement in my boots and need to modify it so they work with... -
The duckbutts look like they were the family dog's chew toy.
...Leave a comment:
-
Leave a comment:
-
I'll second jtb in that Binding Freedom inserts will be easier to get. A 5/16-18 bottoming tap is super easy to find.
Re: Binding Freedom...Leave a comment:
-
Not ideal.
...Leave a comment:
-
Leave a comment:
-
You're right, I worded that poorly. Ski areas will most certainly lose, no matter how the winter goes. I was simply trying to say that if the only other...Leave a comment:
No activity results to display
Leave a comment: